Zum Inhalt springen · Skip to content

Washing salad and vegetables: spinner, machine or sink?

AI-generated ambience image: chef in a bright professional kitchen lifting a stainless steel basket of washed leaf salad out of the spinner, crates of soil-covered potatoes and carrots in front
Illustration, AI-generated

Washing is the step nobody talks about when kitchen equipment is being bought. There are machines for cooking, chilling and dishwashing; washing happens in the sink — until the volumes grow to the point where someone spends half the morning on it. The solutions are far apart in price: a hand-cranked spinner costs 95 euros, an electric one a good three thousand, a fully automatic washing line a multiple of that. Below are the four routes sorted by volume, with the prices from our range — and first the distinction everything depends on: leaf salad and root vegetables are two different jobs.

Two reasons for washing — and they call for different things

The first is hygiene. Potatoes, carrots, celeriac and beetroot carry soil, and soil is how microorganisms get into the kitchen. With leaf salad the load does not come from soil but from the field itself. Food hygiene Regulation (EC) No 852/2004 requires in Annex II that raw materials be stored and handled so that they neither spoil nor become contaminated. In practice that means a defined washing step, separated from the zone where finished dishes stand. How to document it is covered in our HACCP basics.

The second reason is residual water, and it is regularly underestimated. Salad that goes into the bowl wet dilutes the dressing, and twenty minutes later the mix is sitting in a puddle. Spinning dry is not cosmetic; it is the difference between a salad that survives a lunch service and one that does not.

Which leads to the decision that comes first: leaf salad and root vegetables need two different machines. With salad, water has to come out; with a tuber, soil has to come off. One is a centrifuge, the other a brush drum. No single machine does both equally well — and anyone who buys one and tries to solve the other problem with it ends up dissatisfied.

Four routes, sorted by volume

The order is not a ranking by quality. An à la carte operation with thirty lunch covers is right to use the hand-cranked spinner, and a staff canteen serving eight hundred meals will not get far with it.

Method What for Batch size Investment
Sink and colander both, in small quantities a few heads already there
Hand-cranked salad spinner leaf salad, herbs, cut vegetables 12 or 25 litres €95–105
Electric salad spinner leaf salad in series 5–15 kg, 120–720 kg/h €3,082–4,449
Washing insert in the peeling machine tubers and root vegetables 6–35 kg €515–1,031 plus machine
Fully automatic washing and peeling line tubers, large-scale kitchens 30–35 kg, 800–1,000 kg/h on request

The biggest price jump in this field sits between the hand-cranked and the electric spinner: a factor of thirty. There is a reason for it, but it does not apply to every operation — see the next section.

Leaf salad: spin it, don't drain it

The hand-cranked spinner

A basket in a container, a crank in the lid, that is all. The units are plastic, dishwasher-safe and cost between 95 and 105 euros. They come in two sizes, 12 and 25 litres, and both manufacturers in our range build both.

One detail matters more here than the price: the drain. The 25-litre spinner from Bartscher has a 1.6-metre drain hose; the 12-litre version has none. Without a hose the water has to be poured out after every run, and with four runs back to back that is exactly the handling step that grates. So buying the larger spinner is not only about volume.

Manufacturers state litres here, not kilograms, and that is more honest than a conversion: cut iceberg packs differently from rocket or lamb's lettuce. Take the bowl you currently mix your salad in and compare its volume — that is a more reliable yardstick than any weight figure.

The electric spinner

Here a motor turns the basket at 350 or 900 revolutions per minute, with a timer running 60, 120 or 180 seconds. Both units in our range sit on castors with a brake; housing and draining basket are stainless steel, the lid is polypropylene. They run on 230 volts at 0.55 kW, so no three-phase supply is needed.

What separates them from the crank is not speed but consistency. A hundred and eighty seconds at 900 revolutions gives the same result every time, whoever operates the machine. The smaller model takes 5 to 8 kilograms of leaf salad per cycle and manages 120 to 360 kilograms per hour; the larger one takes 10 to 15 kilograms per cycle and 240 to 720 kilograms per hour. The baskets measure 342 by 337 and 372 by 465 millimetres respectively.

Two limitations are worth knowing. The units need floor space, 540 by 750 millimetres, and the 200 version is 815 millimetres tall, which puts it under no wall shelf. And neither comes with on-site service: a repair means shipping the unit in, and that means downtime. If salad preparation depends on this machine, plan for it — either with a hand-cranked spinner as a fallback, or with the willingness to work by hand for a few days.

When the electric spinner is the right one

The threshold is not a cover count but the number of runs. If you fill the 25-litre spinner twice per service, stay with the crank. If you fill it four times, the electric spinner pays for itself through the labour saved — work it out with your own hourly rate and opening days; a blanket figure would be guesswork. The second trigger is consistency: in operations where salad prep falls to a different person every day, the timer is worth more than the extra throughput.

Tubers and root vegetables: the peeling machine washes too

If you have a peeling machine, you almost have the washing machine. Drum, water inlet and drain are the same — it is only the peeling system at the bottom that removes material. Swap it for a washing insert and the same machine washes without peeling. Three versions are available, from €515.14 without brushes to €1,031.14 with full-surface brushes for heavily soiled tubers, each for the FLOTT 16K to 25K series.

The arithmetic behind it is uncomfortably simple: the insert costs little, the machine a lot — from €6,706.28 for the 16K with a 6-kilogram batch to €15,908.28 for the 25K with 25 to 35 kilograms. Anyone who only wants to wash and never peel still pays for the machine. The washing insert therefore pays off where a peeling machine already stands, or is being bought anyway.

Which size and which peeling system suit you is covered in the potato peeling machine guide; the washing insert versions, the service kits and handling peel and starch in the guide to wear parts. We are not repeating either here.

230 or 400 volts — the supply has a say

This point tends to fall off the list during planning, although it narrows the choice harder than the budget does. The electric salad spinners run from an ordinary socket, 230 volts and 0.55 kW. Peeling machines from the FLOTT 16K upwards need three-phase power, 400 volts, plus a fixed water connection from DN 15 on the small units to DN 25 on the 25K.

Without three-phase power at the prep station the choice is effectively made: leaf salad can be solved, tubers cannot. Either a supply line is added, or the potatoes arrive pre-peeled. Both are cost decisions, and both figures are worth knowing before a machine is chosen.

One design feature saves water: on the FLOTT machines the peeling water is dammed up inside the drum. The cushion of water stops the tubers knocking against each other, and consumption drops because nothing is flushed through. A regulating valve meters it further.

When the volume outgrows the machine

Above the 25K comes the fully automatic line. On the FLOTT VAP 25 K, filling, washing, peeling, emptying and waste water discharge all run under programme control, and a solenoid valve limits water consumption. It takes 30 to 35 kilograms per fill and processes 800 to 1,000 kilograms of raw produce per hour, at 1.5 kW on 400 volts and DN 25. Its footprint is 850 by 1,050 millimetres, its height 1,220 millimetres.

The price is not shown in the shop, and for a reason: the finishing table, conveyor and drain routing are defined on site. On this basis Flottwerk also builds complete peeling lines to order. If you are planning at this scale, start with the floor plan rather than the machine — send us the drawing and we will work it through.

What comes after washing

Washed is not prepped. Cutting follows the washing station, and the vegetable cutter is the machine for it — with the note that wet produce sits worse in the cutter than drained produce, so the spinning step helps the cut as well. Onions and garlic are a separate case again and need their own machine; see the onion peeling machine guide. And since every washing station needs a sink: which bowl arrangement makes sense is covered in the sink unit guide.

Equipment and accessories from our range

Frequently asked questions

Is a hand-cranked spinner enough for a restaurant?

For most à la carte operations, yes. The limit is where the salad no longer gets done in two or three runs, so roughly from the third fill of the 25-litre spinner per service. Fill it more often than that and you lose more time than the electric spinner would cost.

Can I wash with my peeling machine without peeling?

Yes, with a washing insert. It replaces the peeling system for the washing cycle so that no material is removed. It requires a machine from the FLOTT 16K to 25K series; the two MINI-FLOTT bench units cannot be converted.

Does pre-washed bagged salad still need washing?

The statement on the pack governs. If the produce is declared washed and ready to eat, do not wash it again — every extra handling step in the kitchen is another opportunity for contamination. If the pack says nothing, treat it as unprocessed produce.

Isn't a domestic salad spinner the same thing?

In principle yes, in continuous use no. The 25-litre units are dishwasher-safe and have a gearbox made of impact-resistant plastic; domestic spinners have far smaller baskets and need replacing more often at twenty runs a day. The general trade-off is set out in the domestic versus professional equipment guide.

Can peeling water go straight down the drain?

Starch does not belong in the pipework. Peel collectors with a starch separator exist for this; which version makes sense when is covered in the guide to wear parts. Anything further that applies at your site is for your waste water utility to confirm — and a grease trap and a starch separator are two different things.

Not sure which stage fits your volume?

Give us two figures: how much leaf salad and how much root vegetable go through the kitchen per day. The stage usually follows from that.

Tell us as well what is available at the prep station — 230 or 400 volts, inlet size and drain. With the machines that decides more than the model does.

Request advice

To the category: Peeling & washing machines

Related guides

Share this guide:

Last updated on 10 November 2026.

Cancel contract