Room designer for commercial kitchens
Enter your room and place equipment in it — in top view, front view and 3D. The blocks carry real equipment dimensions, so you can see straight away whether your plan fits the room. Free, no account needed.
30 types of equipment with dimensions from our own range, as of 2026-10-11. Drawing, moving and rotating all happen in your browser — nothing is transmitted unless you save.
Rooms
1 room · total area 24 m² · occupied 0 m²
Tap and drag units. They snap to walls and neighbours; dragged across a room boundary they change room.
Add equipment into “Küche”
The dimensions are real equipment sizes from our range, as of 2026-10-11.
Save your plan
You get a link and a short code. With them you can return to your plan later on any device — no account needed.
Open a saved plan
What the room designer does not do
- This is a visualisation, not kitchen planning: no survey, no utility plan, no air volume calculation to VDI 2052.
- The dimensions are typical equipment sizes from our range — the unit you finally choose may differ.
- Not a basis for a permit, and no assurance that an arrangement complies with building regulations.
- The planner does not draw services, ducting, make-up air or escape routes.
Turn the sketch into a real plan
When it gets serious we come with a survey, a layout and installation plans — free of charge, with a firm price at the end. The price calculator gives you a rough cost.