Gastro Sausage Filler - 3 l - Vertical - incl. 4 Filling Tubes | Maxima 09300460

Since sausage making by hand is a difficult and time-consuming task, this device is a valuable addition to any butcher's shop. This professional sausage filler is made entirely of stainless steel and has a filling volume of 3 litres. The sausage filler is supplied with four stainless steel filling tubes with diameters of 16, 22, 32, and 38 mm. The pressure plate contains an air vent hole and is sealed with a gasket. The meat is manually pushed into the filling tube via the pressure plate using a crank. With this robust sausage filler, you can twist sausages at two speeds.

Simple and controlled sausage production

To produce sausages with this robust sausage filler, you can use one of the four filling tubes. The filling tubes determine the thickness of the sausages. Simply tilt the container towards you and fill it with the ingredients. The casing from which the sausage is made slides over the filling tube and must be held firmly. Turn the crank and the ingredients are pushed into the filling tube. It is important that the casing is filled as tightly as possible and that no air is added. When the sausage is finished, twist it a few times and remove it from the filling tube.

Dishwasher safe

Since this device is used with fresh ingredients, it must be properly cleaned after use. To this end, the container and filling tubes can be easily removed. As the parts are made of stainless steel, they can be cleaned in the dishwasher. Use disinfectant and a damp cloth for the pressure plate. After cleaning, the sausage filler can be reassembled. In addition, the sausage filler is equipped with four rubber feet, ensuring it stands slip-resistant during use.

Features

• Housing, base plate, shaft, and pressure plate made of stainless steel
• Pressure plate sealed with a gasket
• The output part can be removed at once
• Two speeds for perfect dosing
• Stands on four rubber feet
• Pressure plate with air vent hole

Product specifications

• Net weight: 8kg
• Filling capacity: 3L
• Cylinder dimensions: Ø14 x 20 cm
• Device dimensions: W34 x D30 x H57cm
• Diameter of outlet cylinder: Ø5cm

Included

• Four stainless steel filling tubes with Ø16mm, Ø22mm, Ø32mm, and Ø38mm

At a glance

• ✓ Delivered with four differently sized filling tubes
• ✓ Takes up little space on the work surface
• ✓ Parts can be cleaned in the dishwasher
• – Manually operated

Technical data