
Stromberger Straße 37a · 55444 Seibersbach
Tel. +49 6724 2069393 · info@gastro-nik.com · www.gastro-nik.com
Product data sheet
Gastro Sausage Filler - 5 l - Horizontal - incl. 4 Filling Tubes | Maxima 09300468
Item no.: 09300468 · EAN: 8719632122036 · Manufacturer: Maxima

If you want to prepare sausages quickly and efficiently, you should use a professional sausage filler. Thanks to its horizontal position, this sausage filler fits on any worktop. With a filling capacity of 5 litres, you can quickly produce a large quantity of sausages. The dimensions of the filling tubes are 16, 22, 32 and 38 mm in diameter. Since the pressure plate is equipped with a vent opening, as little air as possible enters the sausages. It is also fitted with a seal. On the side there is a crank that can be operated manually to make sausages at two speeds.
Fast and easy sausage production
When making sausages, first select the desired filling tube. The thinner the tube, the thinner the sausage. Place the ingredients into the hopper, which you simply tilt towards you to fill. Then slide the casing over the filling tube and hold it firmly. Turn the crank with your other hand and the casing will be filled with the sausage mixture. Make sure the sausage is well filled and not too much air gets in. Your sausage is ready in no time and you can move on to the next one.
Completely made of stainless steel
For good hygiene, the sausage filler must be properly cleaned. All parts are made of stainless steel and several parts can be removed for cleaning in the dishwasher. The pressure plate can be easily cleaned with a damp cloth and disinfectant. After cleaning, you can reassemble all parts for the next use. The sausage filler is also equipped with four rubber feet so that it can be placed firmly and without slipping.
Features
- Housing, base plate, shaft and pressure plate made of stainless steel
- The pressure plate is sealed with a gasket
- The outlet part can be removed in one piece
- Two speeds for perfect dosing
- Sits on four rubber feet
- Pressure plate with vent hole
Product specifications
- Net weight: 12kg
- Filling volume: 5L
- Cylinder dimensions: Ø14 x 32cm
- Device dimensions: W69 x D30 x H34cm
- Outlet cylinder diameter: Ø5cm
Includes
- Four stainless steel filling tubes with Ø16mm, Ø22mm, Ø32mm and Ø38mm
At a glance
- ✓ Horizontal model that fits any counter
- ✓ Four filling tubes in different sizes included for selection
- ✓ Easy to clean in the dishwasher
- – Manually operated
Technical data
| Colour | No colour |
| Display | Analog |
| Packaging unit | 5 pieces |
| Housing material | Stainless steel |
| Capacity | 6 litres |
| Design | Table model |
| Number of speed settings | 2 |
| Power connection | No power |
Dimensions & weight
| Dimensions (W × D × H) | 690 × 300 × 340 mm |
| Shipping weight | 10 kg |