Gastronomy Ventilation & Exhaust Technology for Kitchens
1331 items · Page 3 of 28

Wall Bracket Ø 355 | Combisteel 7224.0355
208,49 €

Vertical deflector cap Type 76 | Combisteel 7216.0910
256,27 €

Vertical Deflector Hood Type 63 | Combisteel 7216.0905
204,14 €

Solenoid Valve 1½ | Combisteel 7223.0035
412,63 €

Gas regulator valve 1½ | Combisteel 7223.0040
508,19 €

90° Curve Square 350 | Combisteel 7220.0220
212,83 €

90° Curve Square 450 | Combisteel 7220.0230
260,61 €

90° Curve Square 300 | Combisteel 7220.0215
186,77 €

45° Curve Square 400 | Combisteel 7216.1010
230,21 €

45° Curve Square 350 | Combisteel 7216.1005
212,83 €

Speed Controller 3 Phase 11 Amp | Combisteel 7223.0067
1.203,15 €

Square Drain Pipe 450 | Combisteel 7216.0980
217,17 €

Speed controller 1 phase 11 amp | Combisteel 7223.0062
325,76 €

Square Drainpipe 400 | Combisteel 7216.0975
204,14 €

Speed Controller 1 Phase 5 Amp | Combisteel 7223.0059
204,14 €

Wall Bracket Ø 450 | Combisteel 7224.0450
230,21 €

Wall Bracket Ø 315 | Combisteel 7224.0300
204,14 €

Vertical Deflector Cap Type 100 | Combisteel 7216.0915
291,01 €

Vertical Deflector Cap Type 51 | Combisteel 7216.0900
186,77 €

90° Elbow Square 400 | Combisteel 7220.0225
230,21 €

45° Curve Square 450 | Combisteel 7216.1015
260,61 €

45° Curve Square 300 | Combisteel 7216.1000
186,77 €

Aluminium Valve Ø 450 | Combisteel 7216.1135
238,89 €

Aluminium valve Ø 400 | Combisteel 7216.1130
199,80 €

Square Drain Pipe 350 | Combisteel 7216.0970
182,43 €

Deflector Cap Round Ø 450 | Combisteel 7222.0450
499,50 €

Deflector Cap Round Ø 350 | Combisteel 7222.0350
382,23 €

Deflector Cap Round Ø 300 | Combisteel 7222.0300
312,73 €

Deflector Cap Round Ø 200 | Combisteel 7222.0200
217,17 €

Deflector Cap Round Ø 150 | Combisteel 7222.0190
217,17 €

Roof transit Ø 400 | Combisteel 7221.0070
195,28 €

Transition Piece Square-Round Ø 400 | Combisteel 7222.0540
221,34 €

90° Curve Round Ø 400 | Combisteel 7220.0165
234,37 €

45° Curve Round Ø 400 | Combisteel 7220.0065
199,62 €

Deflector Cap Round Ø 400 | Combisteel 7222.0400
451,72 €

Round Drain Pipe Ø 400 | Combisteel 7218.0400
208,31 €

Deflector Cap Round Ø 250 | Combisteel 7222.0250
273,64 €

Rain Cap Ø 450 | Combisteel 7217.0450
182,25 €

Roof transit Ø 450 | Combisteel 7221.0075
199,80 €

Transition Piece Square-Round Ø 450 | Combisteel 7222.0545
221,34 €

T-piece 90° Complete Ø 450 | Combisteel 7215.0135
243,24 €

90° Curve Round Ø 450 | Combisteel 7220.0167
208,49 €

45° Curve Round Ø 450 | Combisteel 7220.0067
234,37 €

Round Drain Pipe Ø 450 | Combisteel 7218.0450
186,59 €

Fan in Can Double-Walled 12/12/900 1kW | Combisteel 7225.0195
1.346,49 €

Fan in Housing Double-Walled 9/9/1400 | Combisteel 7225.0185
1.216,18 €

Fan in Casing Double-Walled 7/7/1400 | Combisteel 7225.0175
1.042,44 €

Fan in Housing 10/10/1400 | Combisteel 7225.0160
826,13 €
Ventilation & Exhaust Technology
Good kitchen ventilation ensures fresh air, less grease and a pleasant working environment – and is mandatory in commercial kitchens: Where cooking, frying or deep-frying takes place, vapours and grease aerosols must be reliably extracted. At Gastro-Nik, you will find extractor hoods, wall-mounted hoods and ventilation motors from Bartscher, Chromonorm and other brands.
Which hood for which kitchen?
- Wall-mounted hoods are the standard above appliances on the wall – cooker blocks, deep fryers, grills. The overhang is important: The hood should overhang the front of the appliances by at least 200–300 mm to reliably capture rising vapours.
- Ceiling hoods (island hoods) belong above freestanding cooking blocks and capture vapours from all sides.
- Box hoods with larger volume buffer steam peaks – useful above combi steamers and dishwashers.
Correctly dimensioning exhaust capacity
The required air volume depends on the appliances under the hood: The higher the connected load and the fattier the food, the greater the volume flow required. For the precise design of commercial kitchens, the VDI 2052 guideline is decisive – as a rough guide, cooking areas need multiple air changes per hour; a household standard is never sufficient. Also pay attention to the filter type: Metal flame protection filters are mandatory above open cooking areas, they are suitable for dishwashers and must be regularly cleaned – this is also part of fire protection and hygiene requirements.
With or without motor?
Hoods are available with built-in motors (easy installation, short distances) or for connection to an external exhaust motor – the latter is quieter in the kitchen and the better choice for long exhaust routes. Accessories such as replacement filters and controllers are also available from us.
Planning ventilation for a new kitchen? We advise and install: +49 6724 2069393. A comprehensive overview of kitchen planning is provided by the guide Furnishing a Commercial Kitchen.