Stainless steel worktable, with upstand, 200 x 70 | Skyrainbow THATS207A

• AISI 201 stainless steel


• screwed construction


• Worktop with upstand fully reinforced with wooden panel


• NO open wooden edges


• with base shelf


• Product dimensions (WxDxH): 200x70x85cm

Work table with upstand and stainless steel base - 2000 x 700 x 850

The Skyrainbow worktable offers high and consistent quality standards direct from the manufacturer at an excellent price.

General:

• Work table made of chrome-nickel steel AISI 201, material thickness 0.8 mm


• bolted construction


• sturdy construction


• no sharp edges


• particularly easy to clean


• Simple self-assembly


• Worktop NOT assembled on delivery

Worktop:

• Worktop fully reinforced with wooden board


• no open wooden edges


• Height approx. 40mm


• Worktop with 3D upstand, height 100mm, thickness 20mm

Substructure:

• Legs made of square stainless steel tube 38x38mm


• height-adjustable feet, adjustment range -5/+15mm


• Base with reinforcing strut


• Ground clearance approx. 150mm

Optional:

• Waste garbage can


• 3 different sets of drawers

Safety instructions

• Use the table only on a level, stable, and sufficiently sturdy surface.


• Before each use, make sure that all legs, mounting screws, and structural components are properly assembled and securely tightened.


• Do not climb on, sit on, or stand on the tabletop or base.


• Do not move the table when it is heavily loaded. Remove heavy objects before moving it.


• Distribute loads as evenly as possible across the tabletop and base.


• Do not use the table if a leg, screw, or structural component is loose, deformed, or damaged.


• Keep children away from the table during assembly, adjustment, or when moving the product.


• Repair or replace any damaged components before putting the table back into service.