Gastronomy Ventilation & Exhaust Technology for Kitchens
1331 items · Page 24 of 28

Gas filter stainless steel 500x500x25 | Combisteel 7213.0065
121,62 €

Gas regulator valve ¾ | Combisteel 7223.0015
138,99 €

Lamella filter. | Combisteel 7213.0035
56,47 €

Gas filter stainless steel 495x495x25 | Combisteel 7213.0060
95,56 €

Louvre filter. | Combisteel 7213.0030
52,12 €

Wall bracket Ø 250 | Combisteel 7224.0250
173,74 €

Wall Bracket Ø 200 | Combisteel 7224.0200
165,05 €

Square Flange 450 | Combisteel 7216.1050
56,47 €

Square Flange 300 | Combisteel 7216.1035
43,43 €

Square Flange 400 | Combisteel 7216.1045
56,47 €

Square Flange 150 | Combisteel 7216.1020
34,75 €

Square Flange 250 | Combisteel 7216.1030
34,75 €

Gas filter stainless steel 400x500x25 | Combisteel 7213.0070
82,53 €

90° Corner Square 200 | Combisteel 7220.0205
117,27 €

Lamella filter. | Combisteel 7213.0040
60,81 €

90° Square Elbow 150 | Combisteel 7220.0200
95,56 €

Dimmer Switch | Combisteel 7438.0123
86,00 €

45° Curve Square 250 | Combisteel 7216.0995
169,40 €

45° Curve Square 200 | Combisteel 7216.0990
117,27 €

Square Drain Pipe 300 | Combisteel 7216.0965
152,02 €

Square Drainpipe 150 | Combisteel 7216.0950
91,21 €

Square drain pipe 250 | Combisteel 7216.0960
138,99 €

Rosettes Ø 350 | Combisteel 7216.0870
60,81 €

Rosettes Ø 450 | Combisteel 7216.0880
73,84 €

Rosettes Ø 200 | Combisteel 7216.0854
21,72 €

Rosettes Ø 300 | Combisteel 7216.0865
47,78 €

End Cap Ø 400 | Combisteel 7216.0716
65,15 €

Rosette Ø 150 | Combisteel 7216.0850
17,37 €

End cap Ø 350 | Combisteel 7216.0714
47,78 €

End cap Ø 250 | Combisteel 7216.0710
30,40 €

Square Flange 350 | Combisteel 7216.1040
47,78 €

End cap Ø 200 | Combisteel 7216.0708
26,06 €

End cap Ø 150 | Combisteel 7216.0704
26,06 €

Square Flange 200 | Combisteel 7216.1025
34,75 €

Storm Collar 450X450 | Combisteel 7216.0462
121,62 €

Storm Collar 350X350 | Combisteel 7216.0458
104,24 €

Storm Collar 300X300 | Combisteel 7216.0456
99,90 €

90° curve square 250 | Combisteel 7220.0210
169,40 €

Storm collar 200X200 | Combisteel 7216.0452
86,87 €

Storm collar 150X150 | Combisteel 7216.0450
82,53 €

Storm Collar Ø 400 | Combisteel 7216.0365
95,56 €

Storm collar Ø 350 | Combisteel 7216.0360
82,53 €

Storm collar Ø 250 | Combisteel 7216.0345
65,15 €

Storm Collar Ø 200 | Combisteel 7216.0340
60,81 €

45° Elbow Square 150 | Combisteel 7216.0985
95,56 €

Aluminium Valve Ø 300 | Combisteel 7216.1120
156,37 €

Aluminium Valve Ø 250 | Combisteel 7216.1115
125,96 €

Square Drainpipe 200 | Combisteel 7216.0955
108,59 €
Ventilation & Exhaust Technology
Good kitchen ventilation ensures fresh air, less grease and a pleasant working environment – and is mandatory in commercial kitchens: Where cooking, frying or deep-frying takes place, vapours and grease aerosols must be reliably extracted. At Gastro-Nik, you will find extractor hoods, wall-mounted hoods and ventilation motors from Bartscher, Chromonorm and other brands.
Which hood for which kitchen?
- Wall-mounted hoods are the standard above appliances on the wall – cooker blocks, deep fryers, grills. The overhang is important: The hood should overhang the front of the appliances by at least 200–300 mm to reliably capture rising vapours.
- Ceiling hoods (island hoods) belong above freestanding cooking blocks and capture vapours from all sides.
- Box hoods with larger volume buffer steam peaks – useful above combi steamers and dishwashers.
Correctly dimensioning exhaust capacity
The required air volume depends on the appliances under the hood: The higher the connected load and the fattier the food, the greater the volume flow required. For the precise design of commercial kitchens, the VDI 2052 guideline is decisive – as a rough guide, cooking areas need multiple air changes per hour; a household standard is never sufficient. Also pay attention to the filter type: Metal flame protection filters are mandatory above open cooking areas, they are suitable for dishwashers and must be regularly cleaned – this is also part of fire protection and hygiene requirements.
With or without motor?
Hoods are available with built-in motors (easy installation, short distances) or for connection to an external exhaust motor – the latter is quieter in the kitchen and the better choice for long exhaust routes. Accessories such as replacement filters and controllers are also available from us.
Planning ventilation for a new kitchen? We advise and install: +49 6724 2069393. A comprehensive overview of kitchen planning is provided by the guide Furnishing a Commercial Kitchen.