Gastronomy Ventilation & Exhaust Technology for Kitchens
1331 items · Page 25 of 28

Aluminium valve Ø 150 | Combisteel 7216.1105
86,87 €

Rosettes Ø 400 | Combisteel 7216.0875
69,50 €

Rosettes Ø 250 | Combisteel 7216.0860
39,09 €

End Cap Ø450 | Combisteel 7216.0718
69,50 €

Rain Cap Ø 400 | Combisteel 7217.0400
121,62 €

Rain Cap Ø 350 | Combisteel 7217.0350
104,24 €

End cap Ø 300 | Combisteel 7216.0712
39,09 €

Rain Cap Ø 250 | Combisteel 7217.0250
82,53 €

Rain Cap Ø 200 | Combisteel 7217.0200
73,84 €

End cap Ø 180 | Combisteel 7216.0706
26,06 €

Roof transit Ø 350 | Combisteel 7221.0065
121,62 €

Storm Collar 400X400 | Combisteel 7216.0460
121,62 €

Roof Transit Ø 250 | Combisteel 7221.0050
104,24 €

Roof Transit Ø 200 | Combisteel 7221.0045
78,18 €

Storm Collar 250X250 | Combisteel 7216.0454
95,56 €

Transition Piece Square-Round Ø 350 | Combisteel 7222.0535
156,37 €

Storm collar Ø 450 | Combisteel 7216.0370
130,31 €

Transition Piece Square-Round Ø 250 | Combisteel 7222.0525
156,37 €

Transition Piece Square-Round Ø 200 | Combisteel 7222.0520
156,37 €

Storm Collar Ø 300 | Combisteel 7216.0350
73,84 €

90° Round Elbow Ø 350 | Combisteel 7220.0160
147,68 €

Hose Clamp Up to Ø 200 | Combisteel 7216.0170
8,69 €

90° Round Bend Ø 250 | Combisteel 7220.0125
108,59 €

90° Curve Round Ø 200 | Combisteel 7220.0122
69,50 €

Aluminium valve Ø 350 | Combisteel 7216.1125
169,40 €

45° Curve Round Ø 350 | Combisteel 7220.0060
130,31 €

Aluminium valve Ø 200 | Combisteel 7216.1110
117,27 €

45° Curve Round Ø 250 | Combisteel 7220.0045
91,21 €

45° Bend Round Ø 200 | Combisteel 7220.0040
52,12 €

Round Drain Pipe Ø 350 | Combisteel 7218.0350
177,91 €

Round Drain Pipe Ø 250 | Combisteel 7218.0250
143,16 €

Round Drain Pipe Ø 200 | Combisteel 7218.0200
117,10 €

Transition fitting Ø 450-200 | Combisteel 7216.0680
112,93 €

Transition piece Ø 400-250 | Combisteel 7216.0670
112,93 €

Rain Cap Ø 300 | Combisteel 7217.0300
95,56 €

Transition Piece Ø 300-350 | Combisteel 7216.0650
91,21 €

Transition Piece Ø 250-350 | Combisteel 7216.0645
86,87 €

Transition Piece Ø 200-350 | Combisteel 7216.0641
69,50 €

Transition Piece Ø 200-300 | Combisteel 7216.0640
65,15 €

Roof transit Ø 300 | Combisteel 7221.0055
112,93 €

Transition piece Ø 200-150 | Combisteel 7216.0638
52,12 €

Round Flange Ø 400 | Combisteel 7216.0532
34,75 €

Round Flange Ø 350 | Combisteel 7216.0525
26,06 €

Round Flange Ø 300 | Combisteel 7216.0520
26,06 €

Round flange Ø 200 | Combisteel 7216.0510
21,72 €

Transition Piece Square-Round Ø 300 | Combisteel 7222.0530
156,37 €

T-piece 90° Complete Ø 350 | Combisteel 7215.0125
143,34 €

T-piece 90° Complete Ø 300 | Combisteel 7215.0120
130,31 €
Ventilation & Exhaust Technology
Good kitchen ventilation ensures fresh air, less grease and a pleasant working environment – and is mandatory in commercial kitchens: Where cooking, frying or deep-frying takes place, vapours and grease aerosols must be reliably extracted. At Gastro-Nik, you will find extractor hoods, wall-mounted hoods and ventilation motors from Bartscher, Chromonorm and other brands.
Which hood for which kitchen?
- Wall-mounted hoods are the standard above appliances on the wall – cooker blocks, deep fryers, grills. The overhang is important: The hood should overhang the front of the appliances by at least 200–300 mm to reliably capture rising vapours.
- Ceiling hoods (island hoods) belong above freestanding cooking blocks and capture vapours from all sides.
- Box hoods with larger volume buffer steam peaks – useful above combi steamers and dishwashers.
Correctly dimensioning exhaust capacity
The required air volume depends on the appliances under the hood: The higher the connected load and the fattier the food, the greater the volume flow required. For the precise design of commercial kitchens, the VDI 2052 guideline is decisive – as a rough guide, cooking areas need multiple air changes per hour; a household standard is never sufficient. Also pay attention to the filter type: Metal flame protection filters are mandatory above open cooking areas, they are suitable for dishwashers and must be regularly cleaned – this is also part of fire protection and hygiene requirements.
With or without motor?
Hoods are available with built-in motors (easy installation, short distances) or for connection to an external exhaust motor – the latter is quieter in the kitchen and the better choice for long exhaust routes. Accessories such as replacement filters and controllers are also available from us.
Planning ventilation for a new kitchen? We advise and install: +49 6724 2069393. A comprehensive overview of kitchen planning is provided by the guide Furnishing a Commercial Kitchen.