Stainless Steel Work Table with Raised Edge, Welded, Depth 600 mm, Without Bottom, AISI 304 | A&S ARTA296

Work table without bottom Height: 850 mm + 35 mm Depth 600 mm Frame braced and welded on three sides Worktop 40mm thick, supported with chipboard (19mm) and coated on both sides Brushed surface of the sheets Sheet thickness: 1.0 mm Made of stainless steel AISI 304 (V2A) Feet made of 40 x 40 mm square tube, 1.2mm wall thickness Height adjustable feet From 2300 mm width with 6 feet Clear dimension floor to worktop: 750 mm With raised edge All special sizes on request

Equipment: Made of stainless steel AISI 304 (V2A) Made of brushed steel Frame braced and welded on three sides Worktop 40mm thick Worktop supported with chipboard (19mm) Worktop coated on both sides From 2200mm with 6 feet Height adjustable via feet With raised edge

Consultation, delivery and installation via Gastro-Nik — inquire now.